1. Product Description
Hard-wearing and highly resistant polymer sealer for the protection of vinyl and linoleum floors (after installation or following stripping). Creates a mat, anti-slip protective film ensuring a high degree of safety when walking on the treated surface. Conforms to standard E DIN 51 131. Also complies with requirements for sports floors, as per standard DIN 18 032.
2. Areas of Application
Vinyl and linoleum floors. Use on rubber floors is possible only under certain
circumstances and should be checked before use.
3. Method of Application
Shake Secura Mat Hard Sealer well before use. Then apply an even, thin, undiluted coat lengthways to the surface of the cleaned floor (after installation or stripped) using the Polish Applicator System or the Quick Step System. When the protective film is firm to walk on (after approximately 1 hour), repeat the procedure in the crossways direction.
Allow the film to dry for at least 12 hours before the floor is walked on, better still would be overnight.
Consumption: 1 l = 20 m² per coat.
Notes: Ensure that there is sufficient ventilation but avoid exposure to drafts and strong sunlight during application and drying processes and protect the surface from dust. Turn off under-floor central heating in good time prior to use.
4. Technical Data
pH-level: 7.5 (concentrate) Product code for cleaning and care products (Giscode): GE 30 Data on ingredients (EC recommendation): less than 5% anionic surfactants. Contains BENZISOTHIAZOLINONE, METHYLISOTHIAZOLINONE, perfumes, LIMONENE, solvents, care-componenets.
Secura Mat Hard Sealer should be stored in a cool, dry place in its closed original
container. Keep locked up and out of the reach of children. Protect from frost.
5. Quality Inspection
Certified in Germany by:
Otto-Graf-Institute for material testing, University of Stuttgart, Germany, section 46 sport floors.
6. Unit Sizes
5 l canister Art.-No. 2650000501